PixelSpot builds LED video walls at its own factory in Bengaluru and installs them in Kolkata with its own crew. You get a free site survey, a 2-year pixel-to-pixel warranty and the same published price per square foot as every other city in India, + GST and freight.
Jewellery and sweet shops, malls, corporate offices in Sector V and New Town, hotels and banquet halls, clubs and community halls, hospitals and colleges. Park Street, Camac Street, Gariahat, Salt Lake Sector V, New Town, Esplanade, Howrah and Behala: wherever people already look, an LED wall replaces the printed flex or the LCD grid with one seamless screen you change from a phone through PxlOS.
Kolkata humidity is the highest of any Indian metro, and the monsoon is long. Outdoor cabinets are sealed to IP65 at the front and IP54 at the rear with sealed glands; indoor walls get ventilation planned at the survey so condensation never reaches the modules.
Clubs and community organisations that run a screen for Durga Puja and the rest of the year often find owning a wall cheaper than hiring one each season. We do not rent; we build walls you own, and a wall you own can earn through PxlOS the rest of the year.
Bengaluru to Kolkata: how the wall reaches you.
Your wall is designed from your survey, built and burn-in tested at our Jalahalli factory, and you can watch it run your content on a video call before it ships. It then travels about 1,870 km by road, roughly 4–5 days. Our crew flies in (about 2.5 hours) and installs on the day the crates land, trains your team on PxlOS and leaves 5% spare modules on site.
PixelSpot does not rent, hire or lease LED walls. We build and install walls you own. For a one-day event in Kolkata, an event-AV company is the right call.
Starting estimates, one rate card for all of India; the bigger the wall, the better the rate per sq ft we quote. The price per square foot covers the LED panels, the mounting structure and installation by our own crew. The controller is sized to your wall and quoted with it; freight to Kolkata is its own line. GST at 18% is added as IGST and is fully creditable to a registered buyer.
Estimated, installed, controller and freight extra, + GST. Larger walls are quoted at a lower rate per sq ft. With the controller included, a 6 × 4 ft indoor P2.5 wall is ₹1,81,500 + GST and a 12 × 8 ft outdoor P4 wall is ₹5,60,000 + GST. More sizes are on LED wall price in India, and the configurator gives a spec sheet and exact price in 60 seconds ›
Asked in Kolkata.
What does an LED wall cost in Kolkata?
The same published rates as everywhere in India: indoor P2.5 is ₹6,150 per sq ft + GST and outdoor P4 is ₹5,300 per sq ft + GST, installed, controller extra. A 6 × 4 ft indoor P2.5 wall is ₹1,81,500 + GST with the controller. Road freight from Bengaluru to Kolkata is quoted as its own line; crew travel is inside the quote.
How does the wall reach Kolkata, and who installs it?
It is built and burn-in tested at our Jalahalli, Bengaluru factory, crated and sent by road, about 1,870 km and roughly 4–5 days. Our own crew flies in (about 2.5 hours) and installs on the day the crates land. We do not hand installation to a local contractor.
Which pixel pitch suits a shopfront in Kolkata?
For a screen that faces the street, outdoor P4 at up to 4,500 nits reads in daylight and dims automatically after dark; P3 if people read it from the pavement. Inside a showroom or hall, indoor P2.5 suits viewers a few metres away, and P1.8 or finer if they stand closer.
Who services the wall after installation in Kolkata?
The same PixelSpot engineers. PxlOS lets us diagnose the wall remotely first; 5% spare modules stay on site so a local electrician can swap a module under our guidance; and our crew travels when a visit is needed. The 2-year pixel-to-pixel warranty applies in full.
Do you rent LED walls in Kolkata?
No. PixelSpot builds and installs walls you own. For a one-day event in Kolkata an event-AV company is the right call. If the wall will run more than about 60 days a year, owning is usually cheaper than renting.
Is GST different for an order shipped to West Bengal?
No. GST is 18% either way; for an interstate order it is charged as IGST on the same total and a GST-registered buyer claims the full input credit.
Why buy from the manufacturer.
Most LED wall "companies" in India are traders: they import cabinets, add a margin and hand installation to a contractor. PixelSpot designs and builds the wall, installs it and services it. That changes the price, the speed and what happens after the sale.
Factory-direct. No middlemen.
Panels are built and burn-in tested at our own Bengaluru factory. There is no dealer markup between the factory and your wall, and the price per sq ft is published.
