P6 LED Wall Price in Bengaluru: ₹3,500 to ₹6,000 per sq ft, installed

Outdoor P6 · PixelSpot LED wall manufacturer, Jalahalli East, Bengaluru · 2026 installed rates, before GST

Close view of an outdoor P6 LED module of the kind PixelSpot fits on Bengaluru building facades and hoardings
An outdoor P6 module: 32 x 32 pixels on a 192 x 192 mm board, 6 mm between LED centres, IP65 sealed at the front

A P6 LED wall costs ₹3,500 to ₹6,000 per sq ft installed, before GST, from PixelSpot's factory in Bengaluru. That is ₹1.12 to ₹1.92 lakh for an 8x4 ft wall, ₹2.1 to ₹3.6 lakh for 10x6 ft and ₹3.36 to ₹5.76 lakh for 12x8 ft. The P6 we build is an outdoor module: IP65 at the front, IP54 at the rear, 5,500 to 6,500 nits with auto-dimming after dark, made for a building facade, a rooftop sign, a gantry or a hoarding that people read from 6 m and further. It is the coarsest pitch we recommend for a wall that still has to carry a logo and a phone number cleanly, and the first pitch where the per sq ft rate drops low enough to make a very large surface affordable. The rate includes the modules, receiving cards, controller, power supplies, steel frame, cabling, installation by our own crew, PixelOS, 5 per cent spare modules and the 2-year pixel-to-pixel onsite warranty. GST at 18 per cent is extra, with input credit available; the HSN and GST page explains how to claim it.

P6 LED wall price by size, before GST

Wall sizeAreaP6 outdoor, installedResolution
Per sq ft1 sq ft₹3,500 to ₹6,00032 x 32 px per 192 mm module
8x4 ft32 sq ft₹1.12 to ₹1.92 lakh406 x 203 px
10x6 ft60 sq ft₹2.1 to ₹3.6 lakh508 x 304 px
12x8 ft96 sq ft₹3.36 to ₹5.76 lakh609 x 406 px

The lower figure is a plain wall-mounted or fascia install with a Huidu controller. The quote moves towards ₹6,000 per sq ft when the wall needs front-service die-cast cabinets (a facade panel flush against the building with no walkway behind it), a NovaStar-based sending and receiving system, a curved or ceiling-hung frame, or a freestanding pole, rooftop truss or gantry structure, which is quoted as a separate line after the free site survey. Municipal permission drawings, where the landlord or the BBMP asks for them, are also a separate line. The 8x4 and 10x6 ft totals in the table are arithmetic rather than advice: a P6 wall is built from whole 192 mm modules, the pixel count scales with the width, and below about 100 sq ft outdoors we usually quote P4 or P3 instead, because a small P6 surface has too few pixels to draw a logo without visible steps. P6 earns its rate on hoardings and facades of roughly 200 sq ft and more, where the same budget in P4 would buy a much smaller screen.

P6 outdoor specification

SpecP6 outdoor, PixelSpot
True pitch6 mm between LED centres
Module192 x 192 mm, 32 x 32 px (1,024 pixels per module)
Scan rate1/8
Brightness5,500 to 6,500 nits, auto-dimming at night
Ingress protectionIP65 front, IP54 rear
Refresh rate3,840 Hz (specify it; 1,920 Hz panels are cheaper and flicker on phone cameras)
Minimum viewing distance6 m
Ideal viewing distanceAbout 12 m, twice the pitch number
12x8 ft resolution609 x 406 px
Per sq ft installed₹3,500 to ₹6,000, before GST
Warranty2-year pixel-to-pixel onsite

Two lines on that sheet decide whether a "P6" quote from anyone is the same product as ours. The first is the module: 32 x 32 pixels on a 192 x 192 mm board. The finer outdoor module on the same board size is P3 at 64 x 64 pixels, while the 320 x 160 mm board family carries P5 at 64 x 32 and P8 at 40 x 20, so the module resolution cannot be fudged. The second is the scan rate: 1/8 on P6 means each LED is lit for a long slice of every cycle, which is how the module holds 6,500 nits against a west-facing Bengaluru sun and still dims cleanly after dark. The power consumption guide has the draw by pitch, and the brightness guide explains why a north-facing or shaded facade can run at the bottom of the nits range.

Is P6 right for your wall?

Apply the viewing rule from the viewing distance calculator: the minimum comfortable distance in metres is roughly the pitch number, and the picture looks best from about twice that. For P6 that is 6 m minimum and about 12 m ideal. Measure from the wall to where the nearest regular viewer actually stands or drives, not to the edge of the plot. If that measurement is 6 m or more, P6 is the right pitch and paying for a finer one buys pixels nobody can resolve. If it is under 6 m, step finer. Typical P6 walls we survey in and around Bengaluru:

When to step finer

If pedestrians pass within 6 m of the wall, or the content includes a menu, a price list or any text smaller than a shop name, move to P5 for a nearest viewer at 5 m, or to P4, the shopfront standard, for a pavement read at 4 m. P3 at 3 m is for a fascia people read while walking up to the door. The extreme case is the Acai Theory shopfront in Indiranagar, where customers read a menu from 3 to 5 m and the answer was an outdoor P2.5, not a hoarding pitch at all.

When to step coarser

If the nearest viewer is 8 m or more away and the surface is a large hoarding, P8 at ₹2,500 to ₹4,500 per sq ft reads identically from that distance and saves money on every square foot. P10 sits in the same price band for a wall read from 10 m and more. Between P6 and P8 the decision is usually about the smallest element in the artwork: a phone number in a footer strip survives on P6 at 12 m and may break up on P8 unless the wall is very large.

P6 vs P5 vs P8: the neighbouring pitches

SpecP5 outdoorP6 outdoorP8 outdoor
Module320 x 160 mm, 64 x 32 px192 x 192 mm, 32 x 32 px320 x 160 mm, 40 x 20 px
Scan rate1/81/81/5
Brightness5,500 to 6,500 nits5,500 to 6,500 nits6,000 nits and up
Minimum viewing distance5 m6 m8 m
12x8 ft resolution731 x 487 px609 x 406 px457 x 304 px
Per sq ft installed₹4,000 to ₹6,500₹3,500 to ₹6,000₹2,500 to ₹4,500
12x8 ft wall, before GST₹3.84 to ₹6.24 lakh₹3.36 to ₹5.76 lakh₹2.4 to ₹4.32 lakh
Right forFacades with pedestrians at 5 m, petrol-bunk canopies, larger shopfrontsBuilding facades, rooftop signs, stadium screens, gantries read from 6 m and moreHighway hoardings and very large surfaces read from 8 m and more

P5 and P6 share a scan rate and a brightness band, so the choice between them is purely the nearest viewer: 5 m or 6 m. On a 12x8 ft wall P6 is cheaper at both ends of the range, and the pixel difference is invisible from 12 m. Against P8 the saving is larger, but P8 drops to a 1/5 scan and 457 x 304 pixels at 12x8 ft, which is a hoarding resolution: good for a brand mark and a slogan, poor for anything with a face or a line of body text. If your artwork is a photograph or a video with people in it, stay at P6. The full pitch price table lists every outdoor pitch from P3 to P10 side by side, and the pixel pitch guide covers the theory.

What a P6 wall from PixelSpot includes

Resolution and content on a P6 wall

A 12x8 ft P6 wall is 609 x 406 pixels. That is not Full HD, which is 1,920 x 1,080, and no P6 wall of shopfront size can be: the 1,200 px width at which a Full HD video shows without softening is reached only on a facade of hoarding scale. In practice this does not matter, because at 12 m the eye cannot resolve individual pixels on a P6 wall anyway, and the controller downscales a Full HD file cleanly. What matters is the artwork. Brief your designer for a P6 surface the way you would brief a printed hoarding: one message per slide, a logo that fills a large share of the height, a phone number in a single bold weight, no thin rules, no drop shadows and no body text. Photographs and video work well on P6 as long as the subject is large in the frame. Test the artwork on the wall at night as well as at noon, because auto-dimming changes how saturated colours read, and PixelOS lets you keep a day set and a night set.

Installed in Bengaluru and across Karnataka

PixelSpot has built LED walls at its own Bengaluru factory since 2022, with more than 500 installations to date and a 5.0 Google rating from 15 reviews. Within Bengaluru the site survey and 3D mockup are free, delivery and installation are inside the per sq ft rate, and service response is within 24 hours. Across the rest of Karnataka, from Mysuru and Mangaluru to Hubballi, Belagavi and Kalaburagi, the P6 rate on this page is unchanged; the quote adds freight and crew travel as separate lines so you can see them. Hosur and Krishnagiri sit 40 to 90 km from the factory and are quoted as Bengaluru neighbours. We do not install outside Karnataka and its immediate Hosur and Krishnagiri fringe. See the Bengaluru page, the Karnataka districts page and the outdoor LED page for how a facade project runs. For a one-off event rather than a fixed facade, LED wall rental starts from ₹15,000 a day.

How to get an exact P6 quote

  1. Measure the facade or hoarding opening and the distance to where the nearest regular viewer stands or drives. That confirms P6, or tells you to step to P5 or P8.
  2. Use the 60-second LED wall configurator for an instant estimate with GST, spec sheet and BOM, or WhatsApp +91 72048 08334 with the size, a photo of the wall from the road and whether there is rear access.
  3. Book the free survey. We confirm the pitch on site, check the mounting surface, power and any structure needed, and send a 3D mockup of the wall on your actual building with a fixed quotation.

The LED wall price guide covers what is included in more depth, and the size pages give worked totals for 8x4 ft, 10x6 ft and 12x8 ft walls at every pitch.

Planning a facade or hoarding in Bengaluru?

Send the wall size and a photo from the road. We reply with a P6 price, a spec sheet and a free survey slot.

WhatsApp +91 72048 08334 →

Frequently Asked Questions

What is the price of a P6 LED wall per sq ft in Bengaluru?

₹3,500 to ₹6,000 per sq ft installed, before GST, from PixelSpot's Bengaluru factory. That is ₹1.12 to ₹1.92 lakh for an 8x4 ft wall, ₹2.1 to ₹3.6 lakh for 10x6 ft and ₹3.36 to ₹5.76 lakh for 12x8 ft, including the outdoor modules, controller, steel frame, installation, PixelOS, 5 per cent spare modules and the 2-year pixel-to-pixel onsite warranty. A pole, rooftop truss or gantry structure is a separate line after the free survey.

What is the viewing distance for a P6 LED screen?

Minimum 6 m, ideal about 12 m. The rule is that the comfortable distance in metres is roughly the pitch number and the picture looks best from twice that. Measure from the wall to where the nearest regular viewer stands or drives. If anyone reads the screen from inside 6 m, choose P5 at 5 m, P4 at 4 m or P3 at 3 m instead.

Can a P6 LED wall show Full HD video?

Not pixel for pixel. Full HD is 1,920 x 1,080 and a 12x8 ft P6 wall is 609 x 406 pixels, so the controller downscales the file. From 12 m the eye cannot resolve the individual pixels, so video and photographs still look sharp as long as the subject is large in the frame. Brief the artwork like a printed hoarding: one message, a big logo, a bold phone number and no body text.

Is P6 available as an indoor LED wall?

PixelSpot's P6 is an outdoor module only: 192 x 192 mm, 32 x 32 pixels, IP65 front and IP54 rear, 5,500 to 6,500 nits. Indoors it would be far too bright and too coarse for anyone standing inside 6 m. Indoor walls are quoted in P2.5 and finer, from ₹5,500 per sq ft, which is the right product for a showroom, hall or lobby.

P5 vs P6 vs P8 LED wall: which should I choose?

Choose by the nearest viewer. P5 (₹4,000 to ₹6,500 per sq ft, 64 x 32 px modules) for 5 m, P6 (₹3,500 to ₹6,000, 32 x 32 px) for 6 m and P8 (₹2,500 to ₹4,500, 40 x 20 px, 1/5 scan) for 8 m and more. On a 12x8 ft wall that is 731 x 487, 609 x 406 and 457 x 304 pixels respectively. P5 and P6 share the same scan rate and brightness band, so the pixel difference is invisible from 12 m; P8 is cheaper again but is a pure hoarding resolution.

How long does delivery and installation of a P6 wall take in Bengaluru?

The quotation carries a fixed date, set after the free site survey. The cabinets are built and burn-in tested at PixelSpot's Jalahalli East factory, so within Bengaluru the timeline is governed by the frame: a wall-mounted or fascia install is quickest, while a pole, rooftop truss or gantry, or a landlord or BBMP permission drawing, adds fabrication and approval time that is shown on the quote. The same crew that builds the wall installs it, and service response after handover is within 24 hours in Bengaluru.

Light Up Your Facade with LED

Made in Bengaluru. 2-year pixel-to-pixel warranty. Free site visit and 3D mockup.

WhatsApp +91 72048 08334 →