PixelSpot builds LED video walls at its own factory in Jalahalli, Bengaluru, and installs them in Mysore (Mysuru) with its own crew. You get a free site survey, a 2-year warranty and the same published price per square foot as Bengaluru, + GST.
Shopfronts on Sayyaji Rao Road and around Devaraja Market, hotels near the Palace, wedding halls, college auditoriums, and offices in Hebbal and Hootagalli. An LED wall replaces the printed flex with a screen you change from a phone through PxlOS: offers by the hour, video instead of a still print.
For facades, shopfronts and road-facing sites in Mysuru. Up to 4,500 nits with auto-dimming at night, in cabinets rated IP65 at the front and IP54 at the rear.
Mysuru is the closest big city to our factory after Tumakuru. From Jalahalli East the van takes the Outer Ring Road or NICE Road to Kengeri and joins the Bengaluru–Mysuru Expressway (NH-275), past Ramanagara, Channapatna, Maddur, Mandya and Srirangapatna. It is roughly 150 to 160 km and usually about three hours door to door. Traffic at the Bengaluru end decides most of that, so treat both figures as approximate.
That distance shapes the job. A survey in Mysuru is a day trip: we measure the wall, check the power point and the mounting surface, and are back at the factory by evening. On install day the crew that built and tested your panels in Jalahalli loads them, drives down, and mounts and calibrates them at your site. Nothing is handed to a local contractor.
The same run covers the towns on and around the expressway: Mandya, Srirangapatna, Nanjangud and Hunsur. If your site is in one of them, ask on WhatsApp and we plan the survey together with a Mysuru visit.
The nearest wall we have completed is on this same road at Mandya, about 45 km short of Mysuru: an outdoor P4 wall of roughly 21 × 11 ft facing the highway. It is on the installation map on our LED walls page.
One point that is particular to Mysuru: in the heritage core around the Palace, check with the city corporation what signage your building is allowed before you order an outdoor screen. We raise it at the survey. Comparing suppliers? Read PixelSpot compared with another LED wall supplier, side by side.
One rate card for Bengaluru and Mysuru. The price per square foot covers the LED panels, the mounting structure and installation by our own crew. The controller is sized to your wall and quoted with it. GST at 18% is added.
The same published rates as Bengaluru. Indoor P2.5 is ₹6,150 per sq ft + GST and outdoor P4 is ₹5,300 per sq ft + GST, installed, with the controller extra. A 6 × 4 ft indoor P2.5 wall is ₹1,81,500 + GST with the controller included. Crew travel to Mysuru is inside the quote.
How far is Mysuru from your factory, and who installs the wall?
About 150 to 160 km from Jalahalli East on the Bengaluru–Mysuru Expressway (NH-275), usually around three hours by road. Our own crew drives down with the panels and installs them. We do not use a local contractor.
Have you installed an LED wall near Mysuru?
The nearest completed wall is on the highway at Mandya, about 45 km before Mysuru: an outdoor P4 wall of roughly 21 × 11 ft.
Which pixel pitch suits a shopfront in Mysuru?
For a screen that faces the street, outdoor P4 at up to 4,500 nits reads in daylight and dims automatically after dark. Inside a showroom or hall, indoor P2.5 at up to 600 nits suits viewers a few metres away, and P1.8 or finer if people stand closer.
Who services the wall after it is installed in Mysuru?
The same Bengaluru crew that installed it. Every wall carries a 2-year warranty. PxlOS lets us look at the wall remotely first, and when a visit is needed we drive down from Jalahalli.
Why PixelSpot.
We are the manufacturer. That changes the price, the speed and what happens after the sale.
Factory-direct. No middlemen.
Panels are designed, built and burn-in tested at our own Bengaluru factory. There is no dealer markup between the factory and your wall.
