PixelSpot builds LED video walls at its own factory in Bengaluru and installs them anywhere in Meghalaya with its own crew. You get a free survey, a 2-year pixel-to-pixel warranty and the same published price per square foot as every other state, + GST and freight.
Churches, music and event venues, hotels, colleges, government auditoriums, hospitals. Wherever people already look, an LED wall replaces the printed flex or the LCD grid with one seamless screen you change from a phone through PxlOS.
Government conference rooms and outdoor advertising; one long-standing Shillong IT/AV firm covers it.
ShillongTuraJowai
Indoor or outdoor.
Indoor, P1.2 to P2.5
For showrooms, lobbies and halls. Up to 600 nits, tuned for interiors, in IP43 cabinets. The closer people stand, the finer the pitch.
Among the wettest places on earth. IP65 front and IP54 rear is the minimum; sealed glands, extra sealing of the power and data entries and a covered mounting position are planned at the survey.
Shillong's churches, music and event venues, hotels, colleges and the state auditoriums; Tura's institutions. Churches and concert venues want indoor P2.5 and P3; outdoor walls need real weather protection.
Bengaluru to Shillong: how the wall reaches you.
Your wall is designed from your survey, built and burn-in tested at our Jalahalli factory, and you can watch it run your content on a video call before it ships. It then travels 3,000 km by road, roughly 6–7 days. Our crew flies to Guwahati and drives up to Shillong, trains your team on PxlOS and leaves 5% spare modules on site.
Starting estimates, one rate card for all of India; the bigger the wall, the better the rate per sq ft we quote. The price per square foot covers the LED panels, the mounting structure and installation by our own crew. The controller is sized to your wall and quoted with it; freight to Shillong is its own line. GST at 18% is added as IGST and is fully creditable to a registered buyer.
Estimated, installed, controller and freight extra, + GST. Larger walls are quoted at a lower rate per sq ft. With the controller included, a 6 × 4 ft indoor P2.5 wall is ₹1,81,500 + GST and a 12 × 8 ft outdoor P4 wall is ₹5,60,000 + GST. More sizes on LED wall price in India; the configurator gives a spec sheet and exact price in 60 seconds ›
LED wall companies in Meghalaya: how to compare.
A buyer in Meghalaya will meet these names on Google and IndiaMART. We list them because comparing is how you should buy. Ask every vendor the same five questions: who manufactures the cabinet, who installs it, what the warranty says about a single dead pixel, what refresh rate the modules run (3,840 Hz is camera-safe, 1,920 Hz flickers), and the installed price per sq ft in writing. Then compare line by line. Checked October 2026. The type is our reading of each company's own page or listing (manufacturer only where it shows or states its own factory); tell us if we have one wrong and we will correct it. All states compared ›
Company
What they are
What to check
PixelSpotBengaluru factory, installs pan-India
Manufacturer
Own factory, own crew, published ₹/sq ft, 2-yr pixel-to-pixel warranty, 5% spares
IndiaMART Shillong: outdoor ad agency listing LED boards
Asked in Meghalaya.
What does an LED wall cost in Meghalaya?
The same starting estimates as everywhere in India, with a better rate per sq ft the bigger the wall: indoor P2.5 is ₹6,150 per sq ft + GST and outdoor P4 is ₹5,300 per sq ft + GST, installed, controller extra. A 6 × 4 ft indoor P2.5 wall is ₹1,81,500 + GST with the controller; a 12 × 8 ft outdoor P4 wall is ₹5,60,000 + GST. Road freight from Bengaluru to Shillong is quoted as its own line; crew travel is inside the quote.
How does the wall reach Meghalaya, and who installs it?
It is built and burn-in tested at our Jalahalli, Bengaluru factory, crated and sent by road, 3,000 km and roughly 6–7 days to Shillong. Our own crew flies to Guwahati and drives up to Shillong. We do not hand installation to a local contractor.
Which cities in Meghalaya do you cover?
All of them. Shillong, Tura, Jowai are where most enquiries come from, but freight goes anywhere a truck goes, and for hill or remote sites we survey by photo and video first and split large walls into smaller cabinets.
Who services the wall after installation in Meghalaya?
The same PixelSpot engineers. PxlOS lets us diagnose the wall remotely first; 5% spare modules stay on site so a local electrician can swap a module under our guidance; and our crew travels when a visit is needed. The 2-year pixel-to-pixel warranty applies in full.
Do you rent LED walls in Meghalaya?
No. PixelSpot builds and installs walls you own. For a one-day event an event-AV company is the right call. If the wall will run more than about 60 days a year, owning is usually cheaper than renting.
Is GST different for an order shipped to Meghalaya?
No. GST is 18% either way; for an interstate order it is charged as IGST on the same total and a GST-registered buyer claims the full input credit.
Why buy from the manufacturer.
Most LED wall "companies" are traders: they import cabinets, add a margin and hand installation to a contractor. PixelSpot designs and builds the wall, installs it and services it. That changes the price, the speed and what happens after the sale.
Factory-direct. No middlemen.
Panels are built and burn-in tested at our own Bengaluru factory. No dealer markup, and the price per sq ft is published.
Built in Bengaluru, shipped by road and installed by our own crew. Pick your state for freight time, weather notes, the local vendors you will be comparing us with, and the same published price per sq ft.
